BSYKZ - 3800 PRINTER DEVELOPER, 1162223
- MSDS: BSYKZ
- Manufacturer: IBM CORP
- Product Name: 3800 PRINTER DEVELOPER, 1162223
- National Stock Number: 6850-01-035-9145
Product Identification
Product ID:3800 PRINTER DEVELOPER, 1162223
MSDS Date:11/03/1992
FSC:6850
NIIN:01-035-9145
MSDS Number: BSYKZ
Responsible Party
ARMONK, NY 10504
US
Emergency Phone: 800-426-4333
Info Phone: 800-426-4333
Cage: 7N876
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
STYRENE COPOLYMER
CAS: 29497-14-1
OSHA PEL N/K
ACGIH TLV: N/K
ORGANIC PIGMENT
CAS: 8005-02-5
OSHA PEL N/K
ACGIH TLV: N/K
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 12%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
Hazards
LD50 LC50 Mixture:NONE LISTED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION/INGESTION: NON
TOXIC. SKIN: NON IRRITATING. EYES: MAY ACT AS A MECHANICAL
IRRITANT. CHRONIC: RARE INDIVIDUALS MAY NOTE SKIN RASH WITH
REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE AT INTENDED USE
CONCENTRATIONS.
First Aid
First Aid:INHALATION: REMOVE INDIVIDUAL TO FRESH AIR. INGESTION: CALL
MD IMMEDIATELY . SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH
COPIOUSLY WITH RUNNING WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . FIRE MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS SUCH AS CARBON DIOXIDE, CARBON MONOXIDE.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED MATERIALS, TONER
DUST IN HIGH CONCENTRATIONS CAN FORM AN EXPLOSIVE MIXTURE IN AIR
WHICH, IF IGNITED, COULD RESULT IN DUST EXPLOSION.
Accidental Release
Spill Release Procedures:CONTAIN FOR TREATMENT/DISPOSAL, MINIMIZE DUST
DURING CLEANUP. SWEEP UP USING NON-METALLIC BROOM AND DUST PAN.
EXERCISE CARE NOT TO SLIP ON SMALL STEEL BEADS.
Neutralizing Agent:NONE LISTED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATION BELOW CURRENT EXPOSURE LIMITS .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE LISTED BY MANUFACTURER.
Supplemental Safety and Health
NONE LISTED BY MANUFACTURER.
Chemical Properties
Spec Gravity:0.9 (H*2O=1)
Appearance and Odor:FINELY GROUND BLACK POWDER; SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:NONE LISTED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
FLUOROCARBONS, UNIDENTIFIED ORGANICS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.